3 open source boards using the USR-ES1
Real designs built with the USR-ES1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Buslab
tombueng
160 × 100 mm414 parts6LCustom license0ESP32
Bridge
nichtrami
131.8 × 51.8 mm14 parts2LApache-2.00- schematic only · 11 partsESP32
Eth camera
wouldgo
11 partsNo license0
The USR-ES1 in open source designs
The gallery holds 3 open source boards using the USR-ES1 from 3 GitHub repositories; a typical one measures about 145.9 × 75.9 mm and carries around 14 components.
50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Buslab by tombueng.
Microcontrollers on boards using the USR-ES1
What boards using the USR-ES1 are built for
USR-ES1: common questions
Where can I find a USR-ES1 reference design?
Each of the 3 boards on this page is a real design using the USR-ES1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USR-ES1 use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the USR-ES1?
The median is 145.9 × 75.9 mm, and 50% are two-layer designs.
What is the most popular open source board using the USR-ES1?
By GitHub stars, Buslab by tombueng, with 0 stars.
Can I simulate one of these boards using the USR-ES1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.