2 open source boards using the VCAN26A2
Real designs built with the VCAN26A2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Chart plotter hat
gpgreen
65 × 56 mm68 parts4LNo license3STM32
Ahrs can adapter
gpgreen
61.3 × 77 mm33 parts2LMIT0
The VCAN26A2 in open source designs
The gallery holds 2 open source boards using the VCAN26A2 from 2 GitHub repositories; a typical one measures about 63.2 × 66.5 mm and carries around 51 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Chart plotter hat by gpgreen.
Microcontrollers on boards using the VCAN26A2
What boards using the VCAN26A2 are built for
VCAN26A2: common questions
Where can I find a VCAN26A2 reference design?
Each of the 2 boards on this page is a real design using the VCAN26A2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the VCAN26A2 use?
Most are built on Raspberry Pi (1) and STM32 (1).
How big is a typical board using the VCAN26A2?
The median is 63.2 × 66.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the VCAN26A2?
By GitHub stars, Chart plotter hat by gpgreen, with 3 stars.
Can I simulate one of these boards using the VCAN26A2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.