5 open source boards using the W65C22S
Real designs built with the W65C22S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
OtterX
RetroRemake
170.1 × 170.1 mm168 parts4LCERN-OHL-W-2.04065816-computer
mike42
169.7 × 99.8 mm92 parts4LNo license34ByteCradle 6502 MINI BOARD
ifilot
132.1 × 132.1 mm49 parts4LGPL-3.05Pico6502
stevegg
145.3 × 101.1 mm35 parts2LNo license0RP2040/RP2350
Rp6502
clintonimaroo
150 × 100 mm50 parts2LNo license0
How designs wire the W65C22S
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the W65C22S connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
- The RES pin has a pull-up to 5V on 2 of 5 designs, most often 2.2 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1 | Connected to: GND 100% | — |
| VDDpin 20 | Connected to: 5V 100% |
|
| RESpin 34 | Connected to: The microcontroller 40%, a connector 40%, W65C02S 40% |
|
37 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OtterX by RetroRemake, 65816-computer by mike42, ByteCradle 6502 MINI BOARD by ifilot and Rp6502 by clintonimaroo.
The W65C22S in open source designs
The gallery holds 5 open source boards using the W65C22S from 5 GitHub repositories; a typical one measures about 150 × 101.1 mm and carries around 50 components.
60% use four copper layers or more, and 40% carry an open source license.
The most starred is OtterX by RetroRemake.
Parts used alongside the W65C22S
Microcontrollers on boards using the W65C22S
What boards using the W65C22S are built for
W65C22S: common questions
Where can I find a W65C22S reference design?
Each of the 5 boards on this page is a real design using the W65C22S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W65C22S VDD pin?
The VDD pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the W65C22S.
What pull-up resistor is used on the W65C22S RES pin?
The RES pin has a pull-up to 5V on 2 of 5 designs, most often 2.2 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the W65C22S.
What parts are used alongside the W65C22S?
The SST39SF040, W65C02S and W65C816S appear in the most repositories here.
Which microcontrollers do boards using the W65C22S use?
Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the W65C22S?
The median is 150 × 101.1 mm, and 40% are two-layer designs.
What is the most popular open source board using the W65C22S?
By GitHub stars, OtterX by RetroRemake, with 40 stars.
Can I simulate one of these boards using the W65C22S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.