7 open source boards using the W65C02S

Real designs built with the W65C02S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the W65C02S

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the W65C02S connects to, and the resistors, capacitors and other passives placed on it.

  • The RDY pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 8.06 kΩ).
  • The PHI1O pin is left unconnected on 5 of 6 designs.
  • The PHI2O pin is left unconnected on 5 of 6 designs.
  • The RES pin has a pull-up to 3.3V on 4 of 6 designs, most often 4.7 kΩ (then 220 Ω).
RDYpin 2Connected to: A connector 33%
  • Pull-up to 3.3V on 83% · 4.7 kΩ (2), 8.06 kΩ (1), 220 Ω (1)
PHI1Opin 3Connected to: Not connected 83% · 5V 17%
IRQpin 4Connected to: W65C21N 33%, W65C22N 33%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
NMIpin 6Connected to: A connector 33% · not connected 17% · 3.3V 33%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1 kΩ (1)
  • Capacitor to GND on 33% · 10 µF (1)
VDDpin 8Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 33% · 100 nF (2)
VSSpin 21Connected to: GND 83% · a signal 17%
NCpin 35Connected to: Not connected 83% · a signal 17%
PHI2Opin 39Connected to: Not connected 83% · GND 17%
RESpin 40Connected to: A connector 50%, SN74LVC4245APWR 33%, W65C22S 33% · not connected 17%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (2), 220 Ω (1), 1 kΩ (1)
  • Capacitor to GND on 50% · 10 µF (1), 1 µF (1)

31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gd MEGA-65c02 proto pcb by baldengineer, Econopet by DLehenbauer, Commodore pet clone by DLehenbauer and Rp6502 by clintonimaroo.

The W65C02S in open source designs

The gallery holds 7 open source boards using the W65C02S from 6 GitHub repositories; a typical one measures about 163 × 107.9 mm and carries around 57 components.

71% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is Mega IIe by baldengineer.

Microcontrollers on boards using the W65C02S

What boards using the W65C02S are built for

W65C02S: common questions

Where can I find a W65C02S reference design?

Each of the 7 boards on this page is a real design using the W65C02S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the W65C02S RDY pin?

The RDY pin has a pull-up to 3.3V on 5 of 6 designs, most often 4.7 kΩ (then 8.06 kΩ). Counted from the KiCad layouts of 6 open source designs using the W65C02S.

How is the W65C02S PHI1O pin connected?

The PHI1O pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the W65C02S.

How is the W65C02S PHI2O pin connected?

The PHI2O pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the W65C02S.

What parts are used alongside the W65C02S?

The AS6C1008, RP2040, W25Q128JVS, 74LS145 and 74LS245 appear in the most repositories here.

Which microcontrollers do boards using the W65C02S use?

Most are built on RP2040/RP2350 (5).

How big is a typical board using the W65C02S?

The median is 163 × 107.9 mm, and 71% are two-layer designs.

What is the most popular open source board using the W65C02S?

By GitHub stars, Mega IIe by baldengineer, with 33 stars.

Can I simulate one of these boards using the W65C02S before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part