2 open source boards using the XC7S50-FTGB196

Real designs built with the XC7S50-FTGB196, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The XC7S50-FTGB196 in open source designs

The gallery holds 2 open source boards using the XC7S50-FTGB196 from 2 GitHub repositories; a typical one measures about 93.5 × 79.3 mm and carries around 125 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is HW-AEE-Group-E by Yashodhandesh.

Parts used alongside the XC7S50-FTGB196

Microcontrollers on boards using the XC7S50-FTGB196

What boards using the XC7S50-FTGB196 are built for

XC7S50-FTGB196: common questions

Where can I find a XC7S50-FTGB196 reference design?

Each of the 2 boards on this page is a real design using the XC7S50-FTGB196. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the XC7S50-FTGB196 use?

Most are built on FPGA (2).

How big is a typical board using the XC7S50-FTGB196?

The median is 93.5 × 79.3 mm, and 0% are two-layer designs.

What is the most popular open source board using the XC7S50-FTGB196?

By GitHub stars, HW-AEE-Group-E by Yashodhandesh, with 1 stars.

Can I simulate one of these boards using the XC7S50-FTGB196 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part