11 open source boards using the 74LV1T125
Real designs built with the 74LV1T125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
6502 adapter
hoglet67
49 × 75.2 mm57 parts2LGPL-3.0109
6502 adapter
49 × 75.2 mm57 parts2LNo license66
6502 adapter
sharpie7
49 × 75.2 mm57 parts2LGPL-2.019
6502 adapter
DopierRex
49 × 75.2 mm57 parts2LGPL-3.010
Raspberry PiPiPtr
jmlzone
101.6 × 141.7 mm379 parts4LNo license8
6809e adapter
49 × 75.2 mm55 parts2LGPL-3.0109
6809e adapter
49 × 75.2 mm55 parts2LNo license66
6809e adapter
49 × 75.2 mm55 parts2LGPL-2.019
6502 adapter
49 × 75.2 mm57 parts2LGPL-3.017
6809e adapter
49 × 75.2 mm55 parts2LGPL-3.010
6809e adapter
49 × 75.2 mm55 parts2LGPL-3.017
The 74LV1T125 in open source designs
The gallery holds 11 open source boards using the 74LV1T125 from 6 GitHub repositories; a typical one measures about 49 × 75.2 mm and carries around 57 components.
91% are two-layer designs, the rest use four layers or more, and 73% carry an open source license.
The most starred is 6502 adapter by hoglet67.
Parts used alongside the 74LV1T125
Microcontrollers on boards using the 74LV1T125
What boards using the 74LV1T125 are built for
74LV1T125: common questions
Where can I find a 74LV1T125 reference design?
Each of the 11 boards on this page is a real design using the 74LV1T125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74LV1T125?
The 74LVC4245, MC6809E and WD65C02 appear in the most repositories here.
Which microcontrollers do boards using the 74LV1T125 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the 74LV1T125?
The median is 49 × 75.2 mm, and 91% are two-layer designs.
What is the most popular open source board using the 74LV1T125?
By GitHub stars, 6502 adapter by hoglet67, with 109 stars.
Can I simulate one of these boards using the 74LV1T125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.