5 open source boards using the AP62301WU-7
Real designs built with the AP62301WU-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiScalenode cm4-baseboard
antmicro
128.5 × 40 mm125 parts4LApache-2.0151
Gmsl deserializer
75 × 60 mm225 parts4LApache-2.040- schematic only · 100 parts
Cm4-baseboard
100 partsApache-2.036 
Dc scm breakout board
108 × 70 mm274 parts6LApache-2.09
Dc sci debug interposer
90 × 68 mm257 parts8LApache-2.00
The AP62301WU-7 in open source designs
The gallery holds 5 open source boards using the AP62301WU-7 from 5 GitHub repositories; a typical one measures about 99 × 64 mm and carries around 225 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Scalenode cm4-baseboard by antmicro.
Parts used alongside the AP62301WU-7
Microcontrollers on boards using the AP62301WU-7
What boards using the AP62301WU-7 are built for
AP62301WU-7: common questions
Where can I find a AP62301WU-7 reference design?
Each of the 5 boards on this page is a real design using the AP62301WU-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP62301WU-7 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the AP62301WU-7?
The median is 99 × 64 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP62301WU-7?
By GitHub stars, Scalenode cm4-baseboard by antmicro, with 151 stars.
Can I simulate one of these boards using the AP62301WU-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.