11 open source boards using the COM-09032
Real designs built with the COM-09032, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPLMN-3-ECAD
FundamentalFrequency
304.8 × 95.3 mm100 parts2LCC-BY-SA-4.0106
Raspberry PiLeft
Hex-4
127.8 × 107 mm49 parts2LMIT11
ESP32Long range remote lora nrf wifi bluetooth
rmingon
100 × 100 mm42 parts2LCERN-OHL-S-2.02
ESP32Esp32-ble mouse remote
kayaked
50 × 200 mm26 parts2LMIT2
AVR/ArduinoRolltech
kajgm
100 × 49 mm11 parts2LNo license1
Raspberry PiRight
130 × 109 mm49 parts2LMIT11
ESP32SwervecontrollerPCBv1
NIKOLAI-GOGOL444
112 × 53.9 mm65 parts4LApache-2.00
LHS Joystick
dmcke5
2 × 2 mm3 parts2LCERN-OHL-S-2.0131
RHS Joystick
2 × 2 mm3 parts2LCERN-OHL-S-2.0131
Joystick
KOEGlike
25.5 × 32 mm4 parts2LGPL-3.06
Joystick
hackclub
25.5 × 32 mm4 parts2LGPL-3.05
The COM-09032 in open source designs
The gallery holds 11 open source boards using the COM-09032 from 9 GitHub repositories; a typical one measures about 100 × 53.9 mm and carries around 26 components.
91% are two-layer designs, the rest use four layers or more, and 91% carry an open source license.
The most starred is RHS Joystick PCB by dmcke5.
Microcontrollers on boards using the COM-09032
What boards using the COM-09032 are built for
COM-09032: common questions
Where can I find a COM-09032 reference design?
Each of the 11 boards on this page is a real design using the COM-09032. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the COM-09032 use?
Most are built on ESP32 (3), Raspberry Pi (2), AVR/Arduino (1) and NXP (1).
How big is a typical board using the COM-09032?
The median is 100 × 53.9 mm, and 91% are two-layer designs.
What is the most popular open source board using the COM-09032?
By GitHub stars, RHS Joystick PCB by dmcke5, with 131 stars.
Can I simulate one of these boards using the COM-09032 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.