3 open source boards using the DRV2603RUNT
Real designs built with the DRV2603RUNT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Watch-DevKit-HW
ZSWatch
100 × 70 mm100 parts4LGPL-3.0187
Watch-HW
41 × 37.5 mm62 parts4LGPL-3.05
PICController
Xenii1642
65.7 × 58.8 mm23 parts2LNo license13
The DRV2603RUNT in open source designs
The gallery holds 3 open source boards using the DRV2603RUNT from 3 GitHub repositories; a typical one measures about 65.7 × 58.8 mm and carries around 62 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Watch-DevKit-HW by ZSWatch.
Parts used alongside the DRV2603RUNT
Microcontrollers on boards using the DRV2603RUNT
What boards using the DRV2603RUNT are built for
DRV2603RUNT: common questions
Where can I find a DRV2603RUNT reference design?
Each of the 3 boards on this page is a real design using the DRV2603RUNT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the DRV2603RUNT?
The APDS-9306-065, BMI270, BMP581, FAN5622SX and LIS2MDLTR appear in the most repositories here.
Which microcontrollers do boards using the DRV2603RUNT use?
Most are built on PIC (1).
How big is a typical board using the DRV2603RUNT?
The median is 65.7 × 58.8 mm, and 33% are two-layer designs.
What is the most popular open source board using the DRV2603RUNT?
By GitHub stars, Watch-DevKit-HW by ZSWatch, with 187 stars.
Can I simulate one of these boards using the DRV2603RUNT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.