4 open source boards using the FAN5622SX
Real designs built with the FAN5622SX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Watch-DevKit-HW
ZSWatch
100 × 70 mm100 parts4LGPL-3.0187Watch-HW
ZSWatch
41 × 37.5 mm62 parts4LGPL-3.05- schematic only · 84 parts
Daedalus v0
gregtidanian
84 partsNo license0 ZSWatch
yuxiangcheng2002
40.9 × 38 mm62 parts4LNo license0
The FAN5622SX in open source designs
The gallery holds 4 open source boards using the FAN5622SX from 4 GitHub repositories; a typical one measures about 41 × 38 mm and carries around 73 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Watch-DevKit-HW by ZSWatch.
Parts used alongside the FAN5622SX
What boards using the FAN5622SX are built for
FAN5622SX: common questions
Where can I find a FAN5622SX reference design?
Each of the 4 boards on this page is a real design using the FAN5622SX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the FAN5622SX?
The BMI270, BMP581, DRV2603RUNT, LIS2MDLTR and APDS-9306-065 appear in the most repositories here.
How big is a typical board using the FAN5622SX?
The median is 41 × 38 mm, and 0% are two-layer designs.
What is the most popular open source board using the FAN5622SX?
By GitHub stars, Watch-DevKit-HW by ZSWatch, with 187 stars.
Can I simulate one of these boards using the FAN5622SX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.