13 open source boards using the APDS-9306-065
Real designs built with the APDS-9306-065, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Watch-DevKit-HW
ZSWatch
100 × 70 mm100 parts4LGPL-3.0187Nordic nRF
AWatch2-hw
jwise
73.4 × 72.7 mm157 parts4LNo license18BeeLight
Kampi
32 × 29 mm20 parts2LGPL-3.016Watch-HW
ZSWatch
41 × 37.5 mm62 parts4LGPL-3.05ESP32
OSCD Demo
tmjnijssen
94.6 × 94.6 mm76 parts4LCERN-OHL-P-2.03ESP32
Watch
dezash123
42 × 42 mm179 parts6LNo license1ESP32
Biro 1
PROJECT-BIRO
158.5 × 81.5 mm129 parts4LMIT1RISC-V
Moon light
HeyPCB
53.9 × 62.6 mm32 parts2LCERN-OHL-S-2.01RP2040/RP2350
MWatch
mincrmatt12
89.9 × 88.8 mm105 parts4LNo license0Iris brow
HeyPCB
116 × 12 mm16 parts2LCERN-OHL-S-2.00- schematic only · 84 parts
Daedalus v0
gregtidanian
84 partsNo license0 Radiation shield
mirra-org
30 × 30 mm6 parts2LApache-2.00Radiation shield L
mirra-org
30 × 30 mm3 parts2LApache-2.00
How designs wire the APDS-9306-065
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the APDS-9306-065 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 11 of 11 designs, most often 1 µF (then 100 nF).
- The SCL pin has a pull-up to 1.8V on 6 of 11 designs, most often 1.8 kΩ (then 10 kΩ).
- The SDA pin has a pull-up to 1.8V on 6 of 11 designs, most often 1.8 kΩ (then 10 kΩ).
- The INT pin is left unconnected on 7 of 11 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCLpin 1 | Connected to: BMI270 27% |
|
| SDApin 2 | Connected to: BMI270 27% |
|
| VDDpin 3 | Connected to: 3.3V 82% · a signal 18% |
|
| INTpin 4 | Connected to: Not connected 64% · a signal 36% | — |
| NCpin 5 | Connected to: Not connected 100% | — |
| GNDpin 6 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Watch-DevKit-HW by ZSWatch, AWatch2-hw by jwise, BeeLight by Kampi and Watch-HW by ZSWatch.
The APDS-9306-065 in open source designs
The gallery holds 13 open source boards using the APDS-9306-065 from 12 GitHub repositories; a typical one measures about 63.6 × 52.3 mm and carries around 76 components.
58% use four copper layers or more, and 69% carry an open source license.
The most starred is Watch-DevKit-HW by ZSWatch.
Parts used alongside the APDS-9306-065
Microcontrollers on boards using the APDS-9306-065
What boards using the APDS-9306-065 are built for
APDS-9306-065: common questions
Where can I find a APDS-9306-065 reference design?
Each of the 13 boards on this page is a real design using the APDS-9306-065. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the APDS-9306-065 VDD pin?
The VDD pin has a decoupling capacitor on 11 of 11 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the APDS-9306-065.
What pull-up resistor is used on the APDS-9306-065 SCL pin?
The SCL pin has a pull-up to 1.8V on 6 of 11 designs, most often 1.8 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the APDS-9306-065.
What pull-up resistor is used on the APDS-9306-065 SDA pin?
The SDA pin has a pull-up to 1.8V on 6 of 11 designs, most often 1.8 kΩ (then 10 kΩ). Counted from the KiCad layouts of 11 open source designs using the APDS-9306-065.
What parts are used alongside the APDS-9306-065?
The BMI270, BMP581, DRV2603RUNT, FAN5622SX and LIS2MDLTR appear in the most repositories here.
Which microcontrollers do boards using the APDS-9306-065 use?
Most are built on ESP32 (3), Nordic nRF (1), RISC-V (1) and RP2040/RP2350 (1).
How big is a typical board using the APDS-9306-065?
The median is 63.6 × 52.3 mm, and 42% are two-layer designs.
What is the most popular open source board using the APDS-9306-065?
By GitHub stars, Watch-DevKit-HW by ZSWatch, with 187 stars.
Can I simulate one of these boards using the APDS-9306-065 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.