2 open source boards using the ESP32-C3-MINI-1
Real designs built with the ESP32-C3-MINI-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Esp rust board
esp-rs
22.9 × 63.5 mm48 parts2LNo license647
ESP32Paperflux
albanpetit
33.5 × 50 mm43 parts4LNo license10
The ESP32-C3-MINI-1 in open source designs
The gallery holds 2 open source boards using the ESP32-C3-MINI-1 from 2 GitHub repositories; a typical one measures about 28.2 × 56.8 mm and carries around 46 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Esp rust board by esp-rs.
Microcontrollers on boards using the ESP32-C3-MINI-1
What boards using the ESP32-C3-MINI-1 are built for
ESP32-C3-MINI-1: common questions
Where can I find a ESP32-C3-MINI-1 reference design?
Each of the 2 boards on this page is a real design using the ESP32-C3-MINI-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-C3-MINI-1 use?
Most are built on ESP32 (2).
How big is a typical board using the ESP32-C3-MINI-1?
The median is 28.2 × 56.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the ESP32-C3-MINI-1?
By GitHub stars, Esp rust board by esp-rs, with 647 stars.
Can I simulate one of these boards using the ESP32-C3-MINI-1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.