2 open source boards using the INA226
Real designs built with the INA226, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350PocketPD HW
CentyLab
50 × 50 mm81 parts2LCC-BY-SA-4.0191
Iob characterization v02
azonenberg
74.5 × 31 mm123 parts4LBSD-3-Clause193
The INA226 in open source designs
The gallery holds 2 open source boards using the INA226 from 2 GitHub repositories; a typical one measures about 62.3 × 40.5 mm and carries around 102 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Iob characterization v02 by azonenberg.
Microcontrollers on boards using the INA226
What boards using the INA226 are built for
INA226: common questions
Where can I find a INA226 reference design?
Each of the 2 boards on this page is a real design using the INA226. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA226 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the INA226?
The median is 62.3 × 40.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the INA226?
By GitHub stars, Iob characterization v02 by azonenberg, with 193 stars.
Can I simulate one of these boards using the INA226 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.