3 open source boards using the IP4220CZ6
Real designs built with the IP4220CZ6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Ploopy nano
valeriosetti
43 × 55 mm28 parts2LNo license39
ESP32USBee32-S2
dhairyashah1
28.1 × 68.3 mm47 parts2LMIT31- schematic only · 234 partsSTM32
Fx3u 24mr
eddyem
234 parts2LNo license206
The IP4220CZ6 in open source designs
The gallery holds 3 open source boards using the IP4220CZ6 from 3 GitHub repositories; a typical one measures about 35.6 × 61.6 mm and carries around 47 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Fx3u 24mr by eddyem.
What boards using the IP4220CZ6 are built for
IP4220CZ6: common questions
Where can I find a IP4220CZ6 reference design?
Each of the 3 boards on this page is a real design using the IP4220CZ6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the IP4220CZ6 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the IP4220CZ6?
The median is 35.6 × 61.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the IP4220CZ6?
By GitHub stars, Fx3u 24mr by eddyem, with 206 stars.
Can I simulate one of these boards using the IP4220CZ6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.