3 open source boards using the LM2576HVS-5
Real designs built with the LM2576HVS-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license206
STM32Nitrogen
80 × 80 mm136 parts4LNo license206- schematic only · 234 partsSTM32
Fx3u 24mr
234 parts2LNo license206
The LM2576HVS-5 in open source designs
The gallery holds 3 open source boards using the LM2576HVS-5 from 1 GitHub repository; a typical one measures about 96.8 × 92.8 mm and carries around 234 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is Multistepper by eddyem.
Microcontrollers on boards using the LM2576HVS-5
What boards using the LM2576HVS-5 are built for
LM2576HVS-5: common questions
Where can I find a LM2576HVS-5 reference design?
Each of the 3 boards on this page is a real design using the LM2576HVS-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM2576HVS-5 use?
Most are built on STM32 (3).
How big is a typical board using the LM2576HVS-5?
The median is 96.8 × 92.8 mm, and 33% are two-layer designs.
What is the most popular open source board using the LM2576HVS-5?
By GitHub stars, Multistepper by eddyem, with 206 stars.
Can I simulate one of these boards using the LM2576HVS-5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.