6 open source boards using the LM66200DRLR
Real designs built with the LM66200DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiSoleil hardware
protolux-electronics
65 × 30 mm66 parts4LCERN-OHL-P-2.022
RP2040/RP2350RP2040GPSTracker
justsem
99.6 × 53 mm128 parts2LCC-BY-SA-4.011
AQEYE-SB-D1
CIRCUITSTATE
80 × 30 mm65 parts2LMIT1
STM32EPS
MatthiasGeorgImhof
80 × 80 mm238 parts4LCC-BY-NC-4.00
ESP32Ricardo-Hermes
icl-rocketry
43 × 65 mm114 parts4LNo license0
ESP32Smart peltier driver esp32-v1
manhoosbilli1
94 × 48.1 mm84 parts2LNo license0
The LM66200DRLR in open source designs
The gallery holds 6 open source boards using the LM66200DRLR from 6 GitHub repositories; a typical one measures about 80 × 50.6 mm and carries around 99 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Soleil hardware by protolux-electronics.
Microcontrollers on boards using the LM66200DRLR
What boards using the LM66200DRLR are built for
LM66200DRLR: common questions
Where can I find a LM66200DRLR reference design?
Each of the 6 boards on this page is a real design using the LM66200DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM66200DRLR use?
Most are built on ESP32 (2), Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the LM66200DRLR?
The median is 80 × 50.6 mm, and 50% are two-layer designs.
What is the most popular open source board using the LM66200DRLR?
By GitHub stars, Soleil hardware by protolux-electronics, with 22 stars.
Can I simulate one of these boards using the LM66200DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.