8 open source boards using the MCP6002-I-SN
Real designs built with the MCP6002-I-SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Module17
M17-Project
100 × 83 mm186 parts4LCERN-OHL-W-2.0129
RP2040/RP2350MMM main
niektb
40 × 110 mm145 parts4LCC-BY-SA-4.034- schematic only · 1344 partsRP2040/RP2350
LZ-1-Backplane
HynixCJR
1344 parts2LNo license1 
FPGACourant
KrasForge
160 × 100 mm180 parts6LMIT0
FPGACourant.before colored actual models 20260918T190457
160 × 100 mm180 parts6LMIT0
RP2040/RP2350Toepler plus
20 × 106 mm112 parts2LCC-BY-SA-4.034
Andes
40 × 110 mm109 parts2LCC-BY-SA-4.034
RP2040/RP2350PI SCOPE
40 × 110 mm97 parts2LCC-BY-SA-4.034
The MCP6002-I-SN in open source designs
The gallery holds 8 open source boards using the MCP6002-I-SN from 4 GitHub repositories; a typical one measures about 40 × 106 mm and carries around 163 components.
50% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is Module17 by M17-Project.
Microcontrollers on boards using the MCP6002-I-SN
What boards using the MCP6002-I-SN are built for
MCP6002-I-SN: common questions
Where can I find a MCP6002-I-SN reference design?
Each of the 8 boards on this page is a real design using the MCP6002-I-SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6002-I-SN use?
Most are built on RP2040/RP2350 (4), FPGA (2) and STM32 (1).
How big is a typical board using the MCP6002-I-SN?
The median is 40 × 106 mm, and 50% are two-layer designs.
What is the most popular open source board using the MCP6002-I-SN?
By GitHub stars, Module17 by M17-Project, with 129 stars.
Can I simulate one of these boards using the MCP6002-I-SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.