5 open source boards using the MCP6022
Real designs built with the MCP6022, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP23504HPico
rheslip
20.3 × 110 mm71 parts2LNo license82
BF-018A
botanicfields
58.4 × 36.8 mm19 parts2LCC0-1.05
RP2040/RP23504HPicoDSP
20.3 × 110 mm71 parts2LNo license82
BF-018A Panel12
195.6 × 170.2 mm19 parts2LCC0-1.05
RP2040/RP2350Pico 2HP
70 × 30.3 mm52 parts2LNo license82
The MCP6022 in open source designs
The gallery holds 5 open source boards using the MCP6022 from 2 GitHub repositories; a typical one measures about 58.4 × 110 mm and carries around 52 components.
100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is 4HPico by rheslip.
Microcontrollers on boards using the MCP6022
What boards using the MCP6022 are built for
MCP6022: common questions
Where can I find a MCP6022 reference design?
Each of the 5 boards on this page is a real design using the MCP6022. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6022 use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the MCP6022?
The median is 58.4 × 110 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP6022?
By GitHub stars, 4HPico by rheslip, with 82 stars.
Can I simulate one of these boards using the MCP6022 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.