20 open source boards using the MIC5504-3.3YM5-TR
Real designs built with the MIC5504-3.3YM5-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532
FPGATinyFPGA-BX
tinyfpga
17.8 × 35.6 mm41 parts4LCERN-OHL-1.2302
Debugotron - USB Switch
alvarop
60 × 60 mm72 parts4LBSD-3-Clause52
Microchip SAMNigun
raziele
54 × 50.1 mm150 partsNo license40
RP2040/RP2350SWD2USBC Sample Target
51.8 × 20 mm47 parts4LCC0-1.029
STM32VCU
formulaslug
92.5 × 101.6 mm202 parts4LNo license7
FPGAOutput.panel 3x3
Roboy
217 × 139 mm129 parts4LBSD-3-Clause4
GD32Big macro pad
obra
171.6 × 152.4 mm175 parts2LNo license3
AVR/ArduinoStepper driver
harp-tech
124.4 × 80.4 mm207 parts4LCustom license1
WPT-01-TRANSMITTER
SasataniLab
70 × 85 mm185 parts4LAGPL-3.00
FPGAFPGA Logic Analyzer
hack-a-tack
89.7 × 82.9 mm144 parts4LNo license0
STM32Debugotron - SWD Sample Target
39.7 × 14 mm30 parts2LBSD-3-Clause52
Microchip SAMNigun 0603
101.6 × 50.8 mm146 parts2LNo license40
RP2040/RP2350SWD2USBC Sample Target (Basic)
43 × 20 mm36 parts2LCC0-1.029
STM32TBB
139.7 × 63.5 mm159 parts4LNo license7
FPGAPanel 3x3
217 × 139 mm129 parts4LBSD-3-Clause4
STM32Steering wheel
106.4 × 142 mm63 parts2LNo license7
FPGABoard
65 × 39 mm128 parts4LBSD-3-Clause4
STM32FS-4 Charging Board
55.3 × 95.6 mm59 parts2LNo license7
STM32Stm32-test
48.3 × 25.4 mm33 parts4LNo license7
The MIC5504-3.3YM5-TR in open source designs
The gallery holds 20 open source boards using the MIC5504-3.3YM5-TR from 11 GitHub repositories; a typical one measures about 67.5 × 61.8 mm and carries around 129 components.
68% use four copper layers or more, and 45% carry an open source license.
The most starred is MCL86jr by MicroCoreLabs.
Parts used alongside the MIC5504-3.3YM5-TR
Microcontrollers on boards using the MIC5504-3.3YM5-TR
What boards using the MIC5504-3.3YM5-TR are built for
MIC5504-3.3YM5-TR: common questions
Where can I find a MIC5504-3.3YM5-TR reference design?
Each of the 20 boards on this page is a real design using the MIC5504-3.3YM5-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MIC5504-3.3YM5-TR?
The AT25SF081-SSHD-B, DSC6001CI2A-016.0000T, iCE40-LP8K-CM81, LM358QT and MIC5365-1.2YC5-TR appear in the most repositories here.
Which microcontrollers do boards using the MIC5504-3.3YM5-TR use?
Most are built on STM32 (6), FPGA (5), RP2040/RP2350 (2) and Microchip SAM (2).
How big is a typical board using the MIC5504-3.3YM5-TR?
The median is 67.5 × 61.8 mm, and 32% are two-layer designs.
What is the most popular open source board using the MIC5504-3.3YM5-TR?
By GitHub stars, MCL86jr by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the MIC5504-3.3YM5-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.