6 open source boards using the MP2359
Real designs built with the MP2359, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350ESP32-Devkit-Type-C
TobleMiner
25.3 × 48.2 mm54 parts2LMIT90
TI MSP430/CCNsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33
STM32Bms hardware
jsphuebner
64.5 × 85.1 mm68 parts4LGPL-3.014
STM32STM32F405RGT6 STUnoPlus
r-pv
42.3 × 55.8 mm53 parts2LGPL-3.09
STM32LoRa STM32 Board
collins-emasi
51.6 × 56 mm81 parts4LNo license1
STM32STM32 Example 1 board
54.7 × 42 mm46 parts4LNo license1
The MP2359 in open source designs
The gallery holds 6 open source boards using the MP2359 from 5 GitHub repositories; a typical one measures about 50.8 × 55.9 mm and carries around 61 components.
50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is ESP32-Devkit-Type-C by TobleMiner.
Parts used alongside the MP2359
Microcontrollers on boards using the MP2359
What boards using the MP2359 are built for
MP2359: common questions
Where can I find a MP2359 reference design?
Each of the 6 boards on this page is a real design using the MP2359. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MP2359 use?
Most are built on STM32 (4), RP2040/RP2350 (1) and TI MSP430/CC (1).
How big is a typical board using the MP2359?
The median is 50.8 × 55.9 mm, and 50% are two-layer designs.
What is the most popular open source board using the MP2359?
By GitHub stars, ESP32-Devkit-Type-C by TobleMiner, with 90 stars.
Can I simulate one of these boards using the MP2359 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.