2 open source boards using the PLT133-T10W
Real designs built with the PLT133-T10W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FreeDSP-OCTAVIA
freeDSP
178 × 99 mm505 parts4LCC-BY-SA-4.019
FreeDSP-G
170 × 101 mm367 parts4LCC0-1.06
The PLT133-T10W in open source designs
The gallery holds 2 open source boards using the PLT133-T10W from 2 GitHub repositories; a typical one measures about 174 × 100 mm and carries around 436 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is FreeDSP-OCTAVIA by freeDSP.
Parts used alongside the PLT133-T10W
What boards using the PLT133-T10W are built for
PLT133-T10W: common questions
Where can I find a PLT133-T10W reference design?
Each of the 2 boards on this page is a real design using the PLT133-T10W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the PLT133-T10W?
The 74LVC1G04, AMS1117-3.3, PLR135-T10 and TPS5430DDA appear in the most repositories here.
How big is a typical board using the PLT133-T10W?
The median is 174 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the PLT133-T10W?
By GitHub stars, FreeDSP-OCTAVIA by freeDSP, with 19 stars.
Can I simulate one of these boards using the PLT133-T10W before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.