5 open source boards using the RFM95W-868S2
Real designs built with the RFM95W-868S2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Vandal
blinken
147 × 92 mm213 parts2LGPL-3.06
STM32EcoApi BeeHiveMonitoring
EcoApi
90.6 × 58 mm166 parts2LGPL-3.04
STM32Kicad rfm95-breakout board
Bamelink
69.2 × 67 mm60 parts2LNo license1
RP2040/RP2350Glidesat
hjw1112
51.8 × 42 mm62 parts4LNo license0
ESP32Jantteri main
OJ2016
78.5 × 34.3 mm44 parts2LNo license1
The RFM95W-868S2 in open source designs
The gallery holds 5 open source boards using the RFM95W-868S2 from 5 GitHub repositories; a typical one measures about 78.5 × 58 mm and carries around 62 components.
80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Vandal by blinken.
Microcontrollers on boards using the RFM95W-868S2
What boards using the RFM95W-868S2 are built for
RFM95W-868S2: common questions
Where can I find a RFM95W-868S2 reference design?
Each of the 5 boards on this page is a real design using the RFM95W-868S2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RFM95W-868S2 use?
Most are built on ESP32 (2), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the RFM95W-868S2?
The median is 78.5 × 58 mm, and 80% are two-layer designs.
What is the most popular open source board using the RFM95W-868S2?
By GitHub stars, Vandal by blinken, with 6 stars.
Can I simulate one of these boards using the RFM95W-868S2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.