7 open source boards using the RP2040(QFN-56_7x7mm_P0.4mm)
Real designs built with the RP2040(QFN-56_7x7mm_P0.4mm), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Neo6502 Rev B
OLIMEX
80 × 55 mm98 parts2LNo license128
RP2040/RP2350GateMateA1-EVB Rev B
120 × 80 mm288 parts4LGPL-3.046
RP2040/RP2350RP2040pc
80 × 65 mm159 parts4LMIT11
RP2040/RP2350Neo6502 Rev B1
80 × 55 mm98 parts2LNo license128
RP2040/RP2350GateMateA1-EVB Rev C
120 × 80 mm288 parts4LGPL-3.046
RP2040/RP2350Neo6502 Rev A
80 × 55 mm97 parts2LNo license128
RP2040/RP2350GateMateA1-EVB Rev A
120 × 80 mm287 parts4LGPL-3.046
The RP2040(QFN-56_7x7mm_P0.4mm) in open source designs
The gallery holds 7 open source boards using the RP2040(QFN-56_7x7mm_P0.4mm) from 3 GitHub repositories; a typical one measures about 80 × 65 mm and carries around 159 components.
57% use four copper layers or more, and 57% carry an open source license.
The most starred is Neo6502 Rev B1 by OLIMEX.
Parts used alongside the RP2040(QFN-56_7x7mm_P0.4mm)
Microcontrollers on boards using the RP2040(QFN-56_7x7mm_P0.4mm)
What boards using the RP2040(QFN-56_7x7mm_P0.4mm) are built for
RP2040(QFN-56_7x7mm_P0.4mm): common questions
Where can I find a RP2040(QFN-56_7x7mm_P0.4mm) reference design?
Each of the 7 boards on this page is a real design using the RP2040(QFN-56_7x7mm_P0.4mm). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RP2040(QFN-56_7x7mm_P0.4mm) use?
Most are built on RP2040/RP2350 (7).
How big is a typical board using the RP2040(QFN-56_7x7mm_P0.4mm)?
The median is 80 × 65 mm, and 43% are two-layer designs.
What is the most popular open source board using the RP2040(QFN-56_7x7mm_P0.4mm)?
By GitHub stars, Neo6502 Rev B1 by OLIMEX, with 128 stars.
Can I simulate one of these boards using the RP2040(QFN-56_7x7mm_P0.4mm) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.