8 open source boards using the SN74LVC1G07DBVR
Real designs built with the SN74LVC1G07DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PICYukaLink
Misaka0x2730
94.3 × 81.8 mm235 parts4LGPL-3.03
ESP32SF 01 Compute Board
sandgum
128 × 128 mm332 parts4LNo license2
STM32LoRa-Board
phancak
100 × 54 mm116 parts4LMIT2
STM32STM32H7 Board
100 × 50 mm102 parts4LMIT2
RP2040/RP2350StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1
Canjay
atopile
122 × 100 mm152 parts6LMIT29
Hil core
1.5 × 9.6 mm114 parts4LMIT29
Default
glovepost
45 × 167 mm137 parts4LMIT1
The SN74LVC1G07DBVR in open source designs
The gallery holds 8 open source boards using the SN74LVC1G07DBVR from 7 GitHub repositories; a typical one measures about 97.2 × 82.9 mm and carries around 145 components.
100% use four copper layers or more, and 75% carry an open source license.
The most starred is Canjay by atopile.
Parts used alongside the SN74LVC1G07DBVR
Microcontrollers on boards using the SN74LVC1G07DBVR
What boards using the SN74LVC1G07DBVR are built for
SN74LVC1G07DBVR: common questions
Where can I find a SN74LVC1G07DBVR reference design?
Each of the 8 boards on this page is a real design using the SN74LVC1G07DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SN74LVC1G07DBVR?
The SMTSO2515CTJ, STUSB4500QTR, TCA9535PWR, TPS54560DDAR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G07DBVR use?
Most are built on STM32 (2), ESP32 (1), PIC (1) and RP2040/RP2350 (1).
How big is a typical board using the SN74LVC1G07DBVR?
The median is 97.2 × 82.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC1G07DBVR?
By GitHub stars, Canjay by atopile, with 29 stars.
Can I simulate one of these boards using the SN74LVC1G07DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.