2 open source boards using the SSD1306_DISPLAY
Real designs built with the SSD1306_DISPLAY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Temp logger
hnz1102
50 × 70 mm52 parts2LNo license5
ESP32Mini power
46 × 54 mm49 parts2LNo license3
The SSD1306_DISPLAY in open source designs
The gallery holds 2 open source boards using the SSD1306_DISPLAY from 2 GitHub repositories; a typical one measures about 48 × 62 mm and carries around 51 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Temp logger by hnz1102.
Parts used alongside the SSD1306_DISPLAY
Microcontrollers on boards using the SSD1306_DISPLAY
What boards using the SSD1306_DISPLAY are built for
SSD1306_DISPLAY: common questions
Where can I find a SSD1306_DISPLAY reference design?
Each of the 2 boards on this page is a real design using the SSD1306_DISPLAY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SSD1306_DISPLAY use?
Most are built on ESP32 (2).
How big is a typical board using the SSD1306_DISPLAY?
The median is 48 × 62 mm, and 100% are two-layer designs.
What is the most popular open source board using the SSD1306_DISPLAY?
By GitHub stars, Temp logger by hnz1102, with 5 stars.
Can I simulate one of these boards using the SSD1306_DISPLAY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.