6 open source boards using the SSD1306_DISPLAY
Real designs built with the SSD1306_DISPLAY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Mini current meter
hnz1102
30 × 43 mm38 parts2LNo license10ESP32
Temp logger
hnz1102
50 × 70 mm52 parts2LNo license5ESP32
Wakepcbox
hnz1102
40 × 60 mm45 parts2LNo license4ESP32
Mini power
hnz1102
46 × 54 mm49 parts2LNo license3ESP32
Ssh bridge for raspberrypi
hnz1102
93 × 50 mm34 parts2LNo license3ESP32
Min ssh serial bridge
hnz1102
32 × 45 mm20 parts2LNo license3
How designs wire the SSD1306_DISPLAY
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SSD1306_DISPLAY connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ.
- The SCL pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VCCpin 2 | Connected to: 3.3V 100% | — |
| SCLpin 3 | Connected to: The microcontroller 100% |
|
| SDApin 4 | Connected to: The microcontroller 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mini current meter by hnz1102, Temp logger by hnz1102, Wakepcbox by hnz1102 and Mini power by hnz1102.
The SSD1306_DISPLAY in open source designs
The gallery holds 6 open source boards using the SSD1306_DISPLAY from 5 GitHub repositories; a typical one measures about 43 × 52 mm and carries around 42 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Mini current meter by hnz1102.
Parts used alongside the SSD1306_DISPLAY
Microcontrollers on boards using the SSD1306_DISPLAY
What boards using the SSD1306_DISPLAY are built for
SSD1306_DISPLAY: common questions
Where can I find a SSD1306_DISPLAY reference design?
Each of the 6 boards on this page is a real design using the SSD1306_DISPLAY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the SSD1306_DISPLAY SDA pin?
The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SSD1306_DISPLAY.
What pull-up resistor is used on the SSD1306_DISPLAY SCL pin?
The SCL pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SSD1306_DISPLAY.
What parts are used alongside the SSD1306_DISPLAY?
The ESP32-C3-WROOM-02-N4, MCP73831-2-OT and SPX3819M5-L appear in the most repositories here.
Which microcontrollers do boards using the SSD1306_DISPLAY use?
Most are built on ESP32 (6).
How big is a typical board using the SSD1306_DISPLAY?
The median is 43 × 52 mm, and 100% are two-layer designs.
What is the most popular open source board using the SSD1306_DISPLAY?
By GitHub stars, Mini current meter by hnz1102, with 10 stars.
Can I simulate one of these boards using the SSD1306_DISPLAY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.