10 open source boards using the STM32F303CBT6
Real designs built with the STM32F303CBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license206
STM32Nitrogen
80 × 80 mm136 parts4LNo license206
STM32Stm32
98 × 63.5 mm98 parts2LNo license206
STM32Mainboard
58 × 35 mm86 parts2LNo license206
STM32Windshield
66 × 54 mm86 parts2LNo license206
STM32Chiller control
62 × 60.5 mm69 parts2LNo license206
STM32Servo control
53 × 47 mm59 parts2LNo license206
STM32Shutter
61 × 49.5 mm40 parts2LNo license206
STM32Hall
45.3 × 46.9 mm34 parts2LNo license206- schematic only · 234 partsSTM32
Fx3u 24mr
234 parts2LNo license206
The STM32F303CBT6 in open source designs
The gallery holds 10 open source boards using the STM32F303CBT6 from 1 GitHub repository; a typical one measures about 62 × 54 mm and carries around 86 components.
80% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Multistepper by eddyem.
Microcontrollers on boards using the STM32F303CBT6
What boards using the STM32F303CBT6 are built for
STM32F303CBT6: common questions
Where can I find a STM32F303CBT6 reference design?
Each of the 10 boards on this page is a real design using the STM32F303CBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F303CBT6 use?
Most are built on STM32 (10).
How big is a typical board using the STM32F303CBT6?
The median is 62 × 54 mm, and 80% are two-layer designs.
What is the most popular open source board using the STM32F303CBT6?
By GitHub stars, Multistepper by eddyem, with 206 stars.
Can I simulate one of these boards using the STM32F303CBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.