8 open source boards using the TPA6132A2RTER
Real designs built with the TPA6132A2RTER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Open motorcycle intercom
d3vv3
100 × 50 mm116 parts4LMIT49
RP2040/RP2350PortaRe0
0Re0-8192
135 × 77 mm349 parts6LNo license2
STM32ANC Helmet - main board (left earcup)
baba2712
60 × 50 mm139 parts4LMIT0
RP2040/RP2350Speek rx
JBlitzar
80 × 60 mm51 parts2LGPL-3.01
NXPQuad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm180 parts4LNo license0
NXPQuad Preamp and 4-Channel Ambisonic Recorder
138 × 114 mm180 parts4LNo license0
NXPQuad Preamp and 4-Channel Ambisonic Recorder
138 × 114 mm180 parts2LNo license0
NXPQuad Preamp and 4-Channel Ambisonic Recorder
110 × 84.5 mm161 parts2LNo license0
The TPA6132A2RTER in open source designs
The gallery holds 8 open source boards using the TPA6132A2RTER from 5 GitHub repositories; a typical one measures about 122.5 × 80.8 mm and carries around 171 components.
63% use four copper layers or more, and 38% carry an open source license.
The most starred is Open motorcycle intercom by d3vv3.
Parts used alongside the TPA6132A2RTER
Microcontrollers on boards using the TPA6132A2RTER
What boards using the TPA6132A2RTER are built for
TPA6132A2RTER: common questions
Where can I find a TPA6132A2RTER reference design?
Each of the 8 boards on this page is a real design using the TPA6132A2RTER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPA6132A2RTER use?
Most are built on NXP (4), RP2040/RP2350 (2), ESP32 (1) and STM32 (1).
How big is a typical board using the TPA6132A2RTER?
The median is 122.5 × 80.8 mm, and 38% are two-layer designs.
What is the most popular open source board using the TPA6132A2RTER?
By GitHub stars, Open motorcycle intercom by d3vv3, with 49 stars.
Can I simulate one of these boards using the TPA6132A2RTER before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.