12 open source boards using the TPA6132A2RTER

Real designs built with the TPA6132A2RTER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the TPA6132A2RTER

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPA6132A2RTER connects to, and the resistors, capacitors and other passives placed on it.

  • The HPVSS_8 pin has a capacitor to GND on 9 of 9 designs, most often 1 µF (then 2.2 µF).
  • The CPN_9 pin has a series capacitor on 9 of 9 designs, most often 1 µF.
  • The CPP_11 pin has a series capacitor on 9 of 9 designs, most often 1 µF.
  • The HPVDD_12 pin has a capacitor to GND on 9 of 9 designs, most often 2.2 µF.
INL-_1pin 1Connected to: Signal 100%
  • Series capacitor on 44% · 1 µF (3), 680 nF (1)
  • Capacitor to GND on 33% · 1 µF (2), 2.2 nF (1)
INL+_2pin 2Connected to: GND 67% · a signal 33%
INR+_3pin 3Connected to: GND 67% · a signal 33%
INR-_4pin 4Connected to: Signal 100%
  • Series capacitor on 44% · 1 µF (3), 680 nF (1)
  • Capacitor to GND on 33% · 1 µF (2), 2.2 nF (1)
HPVSS_8pin 8Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (7), 2.2 µF (2)
CPN_9pin 9Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (9)
PGND_10pin 10Connected to: GND 100%
CPP_11pin 11Connected to: Signal 100%
  • Series capacitor on 100% · 1 µF (9)
HPVDD_12pin 12Connected to: Signal 89%
  • Capacitor to GND on 100% · 2.2 µF (9)
VDD_14pin 14Connected to: 3.3V 89%
  • Decoupling capacitor on 89% · 2.2 µF (8), 100 nF (6), 10 µF (2)
SGND_15pin 15Connected to: GND 89%
EP_17pin 17Connected to: GND 100%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open motorcycle intercom by d3vv3, PortaRe0 by 0Re0-8192, Speek rx by JBlitzar and ANC Helmet - main board (left earcup) by baba2712.

The TPA6132A2RTER in open source designs

The gallery holds 12 open source boards using the TPA6132A2RTER from 9 GitHub repositories; a typical one measures about 105 × 68.5 mm and carries around 150 components.

50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Open motorcycle intercom by d3vv3.

Parts used alongside the TPA6132A2RTER

Microcontrollers on boards using the TPA6132A2RTER

TPA6132A2RTER: common questions

Where can I find a TPA6132A2RTER reference design?

Each of the 12 boards on this page is a real design using the TPA6132A2RTER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPA6132A2RTER HPVSS_8 pin connected?

The HPVSS_8 pin has a capacitor to GND on 9 of 9 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 9 open source designs using the TPA6132A2RTER.

How is the TPA6132A2RTER CPN_9 pin connected?

The CPN_9 pin has a series capacitor on 9 of 9 designs, most often 1 µF. Counted from the KiCad layouts of 9 open source designs using the TPA6132A2RTER.

How is the TPA6132A2RTER CPP_11 pin connected?

The CPP_11 pin has a series capacitor on 9 of 9 designs, most often 1 µF. Counted from the KiCad layouts of 9 open source designs using the TPA6132A2RTER.

What parts are used alongside the TPA6132A2RTER?

The PCM5102APWR, USBLC6-2SC6 and TPS63001DRCR appear in the most repositories here.

Which microcontrollers do boards using the TPA6132A2RTER use?

Most are built on NXP (4), ESP32 (3), RP2040/RP2350 (2) and STM32 (2).

How big is a typical board using the TPA6132A2RTER?

The median is 105 × 68.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the TPA6132A2RTER?

By GitHub stars, Open motorcycle intercom by d3vv3, with 68 stars.

Can I simulate one of these boards using the TPA6132A2RTER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part