7 open source boards using the TPD2EUSB30

Real designs built with the TPD2EUSB30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

The TPD2EUSB30 in open source designs

The gallery holds 7 open source boards using the TPD2EUSB30 from 6 GitHub repositories; a typical one measures about 50.8 × 45 mm and carries around 75 components.

100% use four copper layers or more, and 14% carry an open source license.

The most starred is Air quality sensor by roepkefeller.

Parts used alongside the TPD2EUSB30

Microcontrollers on boards using the TPD2EUSB30

TPD2EUSB30: common questions

Where can I find a TPD2EUSB30 reference design?

Each of the 7 boards on this page is a real design using the TPD2EUSB30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPD2EUSB30 use?

Most are built on FPGA (2), STM32 (2), ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the TPD2EUSB30?

The median is 50.8 × 45 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPD2EUSB30?

By GitHub stars, Air quality sensor by roepkefeller, with 58 stars.

Can I simulate one of these boards using the TPD2EUSB30 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part