2 open source boards using the XC2S100TQ144
Real designs built with the XC2S100TQ144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoM8SBC-486
maniekx86
150 × 150 mm123 parts4LNo license253
AVR/ArduinoMDA80486SBC Final
mattheeewahn
150 × 150 mm123 parts4LGPL-3.01
The XC2S100TQ144 in open source designs
The gallery holds 2 open source boards using the XC2S100TQ144 from 2 GitHub repositories; a typical one measures about 150 × 150 mm and carries around 123 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is M8SBC-486 by maniekx86.
Parts used alongside the XC2S100TQ144
Microcontrollers on boards using the XC2S100TQ144
What boards using the XC2S100TQ144 are built for
XC2S100TQ144: common questions
Where can I find a XC2S100TQ144 reference design?
Each of the 2 boards on this page is a real design using the XC2S100TQ144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the XC2S100TQ144?
The 486Socket, 74LS245, 74LS573, 8254 and 8259A-2 appear in the most repositories here.
Which microcontrollers do boards using the XC2S100TQ144 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the XC2S100TQ144?
The median is 150 × 150 mm, and 0% are two-layer designs.
What is the most popular open source board using the XC2S100TQ144?
By GitHub stars, M8SBC-486 by maniekx86, with 253 stars.
Can I simulate one of these boards using the XC2S100TQ144 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.