6 open source boards using the HM628512
Real designs built with the HM628512, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
M8SBC-486
maniekx86
150 × 150 mm123 parts4LNo license253Z180-comp
89Mods
99.3 × 88.7 mm63 parts4LMIT3AVR/Arduino
MDA80486SBC Final
mattheeewahn
150 × 150 mm123 parts4LGPL-3.0168k-SBC
transistorfet
154.9 × 139.7 mm72 parts2LGPL-3.069ESP32
Homebrew 486
kanaboid
150 × 150 mm123 parts4LNo license068k-SMT
transistorfet
106.7 × 139.7 mm64 parts2LGPL-3.069
How designs wire the HM628512
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the HM628512 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 16 | Connected to: GND 100% | — |
| VCCpin 32 | Connected to: 5V 100% |
|
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include M8SBC-486 by maniekx86, 68k-SMT by transistorfet, Z180-comp by 89Mods and MDA80486SBC Final by mattheeewahn.
The HM628512 in open source designs
The gallery holds 6 open source boards using the HM628512 from 5 GitHub repositories; a typical one measures about 150 × 144.8 mm and carries around 98 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is M8SBC-486 by maniekx86.
Parts used alongside the HM628512
Microcontrollers on boards using the HM628512
What boards using the HM628512 are built for
HM628512: common questions
Where can I find a HM628512 reference design?
Each of the 6 boards on this page is a real design using the HM628512. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the HM628512 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the HM628512.
What parts are used alongside the HM628512?
The 74LS245, 74LS573, 8254, 8259A-2 and ATmega128L-8A appear in the most repositories here.
Which microcontrollers do boards using the HM628512 use?
Most are built on AVR/Arduino (2) and ESP32 (1).
How big is a typical board using the HM628512?
The median is 150 × 144.8 mm, and 33% are two-layer designs.
What is the most popular open source board using the HM628512?
By GitHub stars, M8SBC-486 by maniekx86, with 253 stars.
Can I simulate one of these boards using the HM628512 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.