3 open source boards using the 486Socket

Real designs built with the 486Socket, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The 486Socket in open source designs

The gallery holds 3 open source boards using the 486Socket from 3 GitHub repositories; a typical one measures about 150 × 150 mm and carries around 123 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is M8SBC-486 by maniekx86.

Microcontrollers on boards using the 486Socket

What boards using the 486Socket are built for

486Socket: common questions

Where can I find a 486Socket reference design?

Each of the 3 boards on this page is a real design using the 486Socket. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 486Socket?

The 74LS245, 74LS573, 8254, 8259A-2 and AMS1117 appear in the most repositories here.

Which microcontrollers do boards using the 486Socket use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 486Socket?

The median is 150 × 150 mm, and 33% are two-layer designs.

What is the most popular open source board using the 486Socket?

By GitHub stars, M8SBC-486 by maniekx86, with 253 stars.

Can I simulate one of these boards using the 486Socket before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part