5 open source boards using the 24LC16
Real designs built with the 24LC16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Led controller hardware
markus-k
100 × 67 mm88 parts2LTAPR-OHL-1.05Cnc mill prototype
itadinanta
102.1 × 119.4 mm79 parts2LNo license4PiADC2
capconix
65 × 56 mm70 parts2LNo license1ESP8266
RGBW-Lampe
martinclausen2
99.6 × 69.6 mm155 parts2LNo license0PumpMonitor
jgOhYeah
119.4 × 55.9 mm30 parts2LMIT1
How designs wire the 24LC16
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 24LC16 connects to, and the resistors, capacitors and other passives placed on it.
- The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 1.5 kΩ).
- The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 1.5 kΩ).
- The A0 pin is left unconnected on 3 of 5 designs (GND on 2).
- The A1 pin is left unconnected on 3 of 5 designs (GND on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: Not connected 60% · GND 40% | — |
| A1pin 2 | Connected to: Not connected 60% · GND 40% | — |
| A2pin 3 | Connected to: Not connected 60% · GND 40% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: A connector 60%, the microcontroller 40% |
|
| SCLpin 6 | Connected to: A connector 60%, the microcontroller 40% |
|
| WPpin 7 | Connected to: GND 60% · not connected 20% · a signal 20% | — |
| VCCpin 8 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Led controller hardware by markus-k, Cnc mill prototype by itadinanta, PiADC2 by capconix and PumpMonitor by jgOhYeah.
The 24LC16 in open source designs
The gallery holds 5 open source boards using the 24LC16 from 5 GitHub repositories; a typical one measures about 100 × 67 mm and carries around 79 components.
100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Led controller hardware by markus-k.
What boards using the 24LC16 are built for
24LC16: common questions
Where can I find a 24LC16 reference design?
Each of the 5 boards on this page is a real design using the 24LC16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the 24LC16 SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 5 open source designs using the 24LC16.
What pull-up resistor is used on the 24LC16 SCL pin?
The SCL pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 5 open source designs using the 24LC16.
How is the 24LC16 A0 pin connected?
The A0 pin is left unconnected on 3 of 5 designs (GND on 2). Counted from the KiCad layouts of 5 open source designs using the 24LC16.
Which microcontrollers do boards using the 24LC16 use?
Most are built on ESP8266 (1) and STM32 (1).
How big is a typical board using the 24LC16?
The median is 100 × 67 mm, and 100% are two-layer designs.
What is the most popular open source board using the 24LC16?
By GitHub stars, Led controller hardware by markus-k, with 5 stars.
Can I simulate one of these boards using the 24LC16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.