10 open source boards using the 27512

Real designs built with the 27512, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the 27512

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 27512 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 14Connected to: GND 100%
VCCpin 28Connected to: 5V 89%
  • Decoupling capacitor on 33% · 100 nF (7)

26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vic2020mainboard by danwerner21, OpenC64WarpSpeed by SukkoPera, Sun3 60 by 54weasels and ZaxCart by jsanpe.

The 27512 in open source designs

The gallery holds 10 open source boards using the 27512 from 9 GitHub repositories; a typical one measures about 146.5 × 101.2 mm and carries around 49 components.

80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Vic2020mainboard by danwerner21.

Parts used alongside the 27512

Microcontrollers on boards using the 27512

What boards using the 27512 are built for

27512: common questions

Where can I find a 27512 reference design?

Each of the 10 boards on this page is a real design using the 27512. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 27512?

The 74LS00, 74LS04, 74LS138, 74LS245 and 74LS74 appear in the most repositories here.

Which microcontrollers do boards using the 27512 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 27512?

The median is 146.5 × 101.2 mm, and 80% are two-layer designs.

What is the most popular open source board using the 27512?

By GitHub stars, Vic2020mainboard by danwerner21, with 78 stars.

Can I simulate one of these boards using the 27512 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part