14 open source boards using the 2N27002DW
Real designs built with the 2N27002DW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
LiteWingV2.5C
jobitjoseph
100 × 100 mm76 parts2LCC-BY-NC-4.054ESP32
Panel
RamRamAndroid
131 × 100 mm83 parts2LNo license1ESP32
Acestat-Wireless
jobitjoseph
81 × 61 mm134 parts4LNo license0ESP32
LiteWingV2.5C
HuynhCongDat1412
100 × 100 mm76 parts2LCC-BY-NC-4.00ESP32
LiteWingV2.5C-without jst
nikhilChandra-coder
100 × 100 mm76 parts2LNo license0ESP32
LiteWingV2.5C
ghostlyd
100 × 100 mm76 parts2LCC-BY-NC-4.00ESP32
LiteWingV2.5C
willyb234
100 × 100 mm76 parts2LCC-BY-NC-4.00ESP32
Thermal-Camera
Abhey-05
90 × 60 mm56 parts2LNo license0ESP32
LieWingV2.6.C
jobitjoseph
100 × 100 mm75 parts2LCC-BY-NC-4.054ESP32
Drone
RamRamAndroid
100 × 100 mm75 parts2LNo license1ESP32
Drone updated
nikhilChandra-coder
47.6 × 46 mm75 parts2LNo license0ESP32
LieWingV2.6.C
HuynhCongDat1412
100 × 100 mm75 parts2LCC-BY-NC-4.00ESP32
LieWingV2.6.C
ghostlyd
100 × 100 mm75 parts2LCC-BY-NC-4.00ESP32
LieWingV2.6.C
willyb234
100 × 100 mm75 parts2LCC-BY-NC-4.00
How designs wire the 2N27002DW
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 2N27002DW connects to, and the resistors, capacitors and other passives placed on it.
- The 3 pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ.
- The 6 pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ.
- The 6 pin has a capacitor to GND on 8 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3pin 3 | Connected to: The microcontroller 100% |
|
| 6pin 6 | Connected to: The microcontroller 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LieWingV2.6.C by jobitjoseph, Drone by RamRamAndroid, Thermal-Camera by Abhey-05 and LieWingV2.6.C by ghostlyd.
The 2N27002DW in open source designs
The gallery holds 14 open source boards using the 2N27002DW from 8 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 76 components.
93% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is LiteWingV2.5C by jobitjoseph.
Parts used alongside the 2N27002DW
Microcontrollers on boards using the 2N27002DW
What boards using the 2N27002DW are built for
2N27002DW: common questions
Where can I find a 2N27002DW reference design?
Each of the 14 boards on this page is a real design using the 2N27002DW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the 2N27002DW 3 pin?
The 3 pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the 2N27002DW.
What pull-up resistor is used on the 2N27002DW 6 pin?
The 6 pin has a pull-up to 3.3V on 8 of 8 designs, most often 10 kΩ. Counted from the KiCad layouts of 8 open source designs using the 2N27002DW.
What parts are used alongside the 2N27002DW?
The CH340K, AO3401A, ESP32-S3-WROOM-1, MPU-6050 and SPX3819M5-L-3-3 appear in the most repositories here.
Which microcontrollers do boards using the 2N27002DW use?
Most are built on ESP32 (14).
How big is a typical board using the 2N27002DW?
The median is 100 × 100 mm, and 93% are two-layer designs.
What is the most popular open source board using the 2N27002DW?
By GitHub stars, LiteWingV2.5C by jobitjoseph, with 54 stars.
Can I simulate one of these boards using the 2N27002DW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.