8 open source boards using the 4052

Real designs built with the 4052, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 4052

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 4052 connects to, and the resistors, capacitors and other passives placed on it.

  • The INH pin is tied to GND on 7 of 7 designs.
  • The VEE pin is tied to GND on 5 of 7 designs (a signal on 2).
  • The VDD pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 22 µF).
INHpin 6Connected to: GND 100%
VEEpin 7Connected to: GND 71% · a signal 29%
VSSpin 8Connected to: GND 100%
VDDpin 16Connected to: VCC 100%
  • Decoupling capacitor on 43% · 100 nF (2), 22 µF (1)

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MixSID by hbekel, NES backup by digilogistist, Robocat by Windfisch and Io daughterboard by Jaxc.

The 4052 in open source designs

The gallery holds 8 open source boards using the 4052 from 7 GitHub repositories; a typical one measures about 96.5 × 85 mm and carries around 79 components.

63% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is MixSID by hbekel.

Parts used alongside the 4052

Microcontrollers on boards using the 4052

What boards using the 4052 are built for

4052: common questions

Where can I find a 4052 reference design?

Each of the 8 boards on this page is a real design using the 4052. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 4052 INH pin connected?

The INH pin is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 4052.

How is the 4052 VEE pin connected?

The VEE pin is tied to GND on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the 4052.

What decoupling capacitors do designs use on the 4052 VDD pin?

The VDD pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the 4052.

Which microcontrollers do boards using the 4052 use?

Most are built on STM32 (3), PIC (2) and RP2040/RP2350 (1).

How big is a typical board using the 4052?

The median is 96.5 × 85 mm, and 63% are two-layer designs.

What is the most popular open source board using the 4052?

By GitHub stars, MixSID by hbekel, with 26 stars.

Can I simulate one of these boards using the 4052 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part