2 open source boards using the 700-MAX16054AZTT

Real designs built with the 700-MAX16054AZTT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The 700-MAX16054AZTT in open source designs

The gallery holds 2 open source boards using the 700-MAX16054AZTT from 2 GitHub repositories; a typical one measures about 41.4 × 108 mm and carries around 168 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is The-Mesh3310-Project by JLTelectronics.

Microcontrollers on boards using the 700-MAX16054AZTT

What boards using the 700-MAX16054AZTT are built for

700-MAX16054AZTT: common questions

Where can I find a 700-MAX16054AZTT reference design?

Each of the 2 boards on this page is a real design using the 700-MAX16054AZTT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 700-MAX16054AZTT?

The 595-TPS63031DSKR, BQ24074RGT, MAX98357A, MX25R1635FZNIH0 and MX25R1635FZUIH0 appear in the most repositories here.

Which microcontrollers do boards using the 700-MAX16054AZTT use?

Most are built on Nordic nRF (2).

How big is a typical board using the 700-MAX16054AZTT?

The median is 41.4 × 108 mm, and 0% are two-layer designs.

What is the most popular open source board using the 700-MAX16054AZTT?

By GitHub stars, The-Mesh3310-Project by JLTelectronics, with 26 stars.

Can I simulate one of these boards using the 700-MAX16054AZTT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part