7 open source boards using the 7447

Real designs built with the 7447, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 7447

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 7447 connects to, and the resistors, capacitors and other passives placed on it.

  • The B pins have a series resistor on 6 of 7 designs, most often 330 Ω (then 200 Ω).
  • The C pins have a series resistor on 6 of 7 designs, most often 330 Ω (then 200 Ω).
  • The D pins have a series resistor on 6 of 7 designs, most often 330 Ω (then 200 Ω).
  • The A pins have a series resistor on 6 of 7 designs, most often 330 Ω (then 200 Ω).
Bpin 1, 12Connected to: Signal 100%
  • Series resistor on 86% · 330 Ω (4), 200 Ω (1), 100 Ω (1)
Cpin 2, 11Connected to: Signal 100%
  • Series resistor on 86% · 330 Ω (4), 200 Ω (1), 100 Ω (1)
LTpin 3Connected to: VCC 86%
BIpin 4Connected to: VCC 86%
RBIpin 5Connected to: VCC 86%
Dpin 6, 10Connected to: Signal 86%
  • Series resistor on 86% · 330 Ω (4), 200 Ω (1), 100 Ω (1)
Apin 7, 13Connected to: Signal 100%
  • Series resistor on 86% · 330 Ω (4), 200 Ω (1), 100 Ω (1)
GNDpin 8Connected to: GND 100%
Epin 9Connected to: Signal 100%
  • Series resistor on 86% · 330 Ω (3), 200 Ω (1), 100 Ω (1)
Gpin 14Connected to: Signal 100%
  • Series resistor on 86% · 330 Ω (3), 200 Ω (1), 100 Ω (1)
Fpin 15Connected to: Signal 100%
  • Series resistor on 86% · 330 Ω (3), 200 Ω (1), 100 Ω (1)
VCCpin 16Connected to: 5V 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Traditional pcb design by Ravinx001, Segundero 555 by aalonsopuig, UP-Down Counter with 4029 - by Gilbert-box and Frequency-Meter by rakshit9695.

The 7447 in open source designs

The gallery holds 7 open source boards using the 7447 from 7 GitHub repositories; a typical one measures about 76 × 77.7 mm and carries around 28 components.

100% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is Traditional pcb design by Ravinx001.

Parts used alongside the 7447

What boards using the 7447 are built for

7447: common questions

Where can I find a 7447 reference design?

Each of the 7 boards on this page is a real design using the 7447. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 7447 B pin?

The B pins have a series resistor on 6 of 7 designs, most often 330 Ω (then 200 Ω). Counted from the KiCad layouts of 7 open source designs using the 7447.

What resistor goes on the 7447 C pin?

The C pins have a series resistor on 6 of 7 designs, most often 330 Ω (then 200 Ω). Counted from the KiCad layouts of 7 open source designs using the 7447.

What resistor goes on the 7447 D pin?

The D pins have a series resistor on 6 of 7 designs, most often 330 Ω (then 200 Ω). Counted from the KiCad layouts of 7 open source designs using the 7447.

How big is a typical board using the 7447?

The median is 76 × 77.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the 7447?

By GitHub stars, Traditional pcb design by Ravinx001, with 1 stars.

Can I simulate one of these boards using the 7447 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part