11 open source boards using the 74AHC04
Real designs built with the 74AHC04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
RS64c
lhm0
168 × 131 mm145 parts4LCC-BY-NC-4.045UniMixBase
jarekkt
130.5 × 171 mm144 parts4LNo license6Gotek-SFRC2DB
liveboxandy
111.6 × 59.4 mm67 parts2LNo license4Gotek-Compatible-AT32F435-26Pin
liveboxandy
111.6 × 59.4 mm72 parts2LCC0-1.03AVR/Arduino
SDG3
christopherwj
100 × 100 mm73 parts2LNo license1Gotek-SFRC2DB-Modified
liveboxandy
111.6 × 59.4 mm66 parts2LCC0-1.01- schematic only · 63 parts
Gotek-Compatible-AT32F435-26Pin-SMD
liveboxandy
63 partsCC0-1.01 NXP
Mainframe led tube
lordiii
99.1 × 116.8 mm79 parts2LGPL-3.00X16glasgow
jkominek
78 × 62.3 mm12 parts2LNo license0AOS16 GPU
AJain9199
81 × 60 mm106 parts4LNo license1Bodge inv
antonloof
82.5 × 50 mm6 parts2LNo license0
How designs wire the 74AHC04
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74AHC04 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: Signal 100% |
|
| Pin 4 | Connected to: Signal 70% · not connected 30% |
|
| Pin 6 | Connected to: Signal 70% · not connected 30% |
|
| GNDpin 7 | Connected to: GND 90% | — |
| Pin 8 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 10 | Connected to: Not connected 50% · a signal 50% |
|
| Pin 12 | Connected to: Not connected 50% · a signal 50% |
|
| VCCpin 14 | Connected to: 5V 90% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RS64c by lhm0, UniMixBase by jarekkt, Gotek-SFRC2DB by liveboxandy and Gotek-Compatible-AT32F435-26Pin by liveboxandy.
The 74AHC04 in open source designs
The gallery holds 11 open source boards using the 74AHC04 from 11 GitHub repositories; a typical one measures about 105.8 × 61.1 mm and carries around 72 components.
70% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is RS64c by lhm0.
Parts used alongside the 74AHC04
Microcontrollers on boards using the 74AHC04
What boards using the 74AHC04 are built for
74AHC04: common questions
Where can I find a 74AHC04 reference design?
Each of the 11 boards on this page is a real design using the 74AHC04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC04 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the 74AHC04.
What parts are used alongside the 74AHC04?
The AMS1117-3.3V, SST25VF016B-50-4C-S2AF, at32f415rct7 and AT32F435RGT7 appear in the most repositories here.
Which microcontrollers do boards using the 74AHC04 use?
Most are built on AVR/Arduino (1), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the 74AHC04?
The median is 105.8 × 61.1 mm, and 70% are two-layer designs.
What is the most popular open source board using the 74AHC04?
By GitHub stars, RS64c by lhm0, with 45 stars.
Can I simulate one of these boards using the 74AHC04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.