6 open source boards using the 74HC259
Real designs built with the 74HC259, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
SB-mini-II
simonboak
184.2 × 169.5 mm91 parts4LMIT74Main Board
juniperlynx
212 × 126 mm75 parts2LNo license1SMS-3D-glasses genesis cart stack
abzman
83.8 × 60.8 mm29 parts2LUnlicense1CFT Board 1
alexiosc
233.4 × 280 mm222 parts2LGPL-3.06Block Relay Daughter
DavidMFlynn
157.5 × 99.1 mm92 parts2LMIT1Output32DC
DavidMFlynn
66 × 117 mm92 parts2LMIT1
How designs wire the 74HC259
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC259 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 nF).
- The CLR pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 22 nF).
- The CLR pin has a pull-up to 5V on 2 of 5 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| CLRpin 15 | Connected to: A connector 40% · 5V 40% |
|
| VCCpin 16 | Connected to: 5V 100% |
|
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SB-mini-II by simonboak, CFT Board 1 by alexiosc, SMS-3D-glasses genesis cart stack by abzman and Block Relay Daughter by DavidMFlynn.
The 74HC259 in open source designs
The gallery holds 6 open source boards using the 74HC259 from 5 GitHub repositories; a typical one measures about 170.8 × 121.5 mm and carries around 92 components.
83% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is SB-mini-II by simonboak.
Microcontrollers on boards using the 74HC259
What boards using the 74HC259 are built for
74HC259: common questions
Where can I find a 74HC259 reference design?
Each of the 6 boards on this page is a real design using the 74HC259. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC259 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 5 open source designs using the 74HC259.
How is the 74HC259 CLR pin connected?
The CLR pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 22 nF). Counted from the KiCad layouts of 5 open source designs using the 74HC259.
What parts are used alongside the 74HC259?
The 74HC00, 74HC138, 74HC193, 74HC251 and 74HC74 appear in the most repositories here.
Which microcontrollers do boards using the 74HC259 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the 74HC259?
The median is 170.8 × 121.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the 74HC259?
By GitHub stars, SB-mini-II by simonboak, with 74 stars.
Can I simulate one of these boards using the 74HC259 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.