5 open source boards using the 74LS192

Real designs built with the 74LS192, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 74LS192

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LS192 connects to, and the resistors, capacitors and other passives placed on it.

  • The CO pin is left unconnected on 5 of 5 designs.
  • The BO pin is left unconnected on 5 of 5 designs.
  • The LOAD pin has a pull-up to 5V on 4 of 5 designs, most often 1 kΩ.
  • The B pin is tied to 5V on 4 of 5 designs.
Bpin 1Connected to: 5V 80% · GND 20%
UPpin 5Connected to: 5V 60% · a signal 40%
GNDpin 8Connected to: GND 100%
Dpin 9Connected to: GND 80% · 5V 20%
Cpin 10Connected to: GND 80% · 5V 20%
LOADpin 11Connected to: 74LS192 60%, a connector 40%
  • Pull-up to 5V on 80% · 1 kΩ (4)
  • Resistor to GND on 60% · 10 kΩ (3)
COpin 12Connected to: Not connected 100%
BOpin 13Connected to: Not connected 100%
CLRpin 14Connected to: GND 80% · a signal 20%
Apin 15Connected to: GND 80% · 5V 20%
VCCpin 16Connected to: 5V 100%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zx81-external rom with display by zxinfo-diy-electronics, Control board by edatki, 24-Second Counter by gg-orozco and 24-Second Counter by shannadale.

The 74LS192 in open source designs

The gallery holds 5 open source boards using the 74LS192 from 5 GitHub repositories; a typical one measures about 82.5 × 70 mm and carries around 28 components.

100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Zx81-external rom with display by zxinfo-diy-electronics.

Parts used alongside the 74LS192

Microcontrollers on boards using the 74LS192

What boards using the 74LS192 are built for

74LS192: common questions

Where can I find a 74LS192 reference design?

Each of the 5 boards on this page is a real design using the 74LS192. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LS192 CO pin connected?

The CO pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LS192.

How is the 74LS192 BO pin connected?

The BO pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74LS192.

What pull-up resistor is used on the 74LS192 LOAD pin?

The LOAD pin has a pull-up to 5V on 4 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the 74LS192.

Which microcontrollers do boards using the 74LS192 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74LS192?

The median is 82.5 × 70 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74LS192?

By GitHub stars, Zx81-external rom with display by zxinfo-diy-electronics, with 2 stars.

Can I simulate one of these boards using the 74LS192 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part