7 open source boards using the 74LS251
Real designs built with the 74LS251, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CP297s
Danjovic
155.1 × 156 mm127 parts2LGPL-3.04ESP8266
Soil Sensor Hub
ArtoLabs
98 × 91.1 mm74 parts2LMIT3Block Relay Daughter
DavidMFlynn
157.5 × 99.1 mm92 parts2LMIT174xx pdp8 reg mux board
sebsikora
137.2 × 88.9 mm42 parts4LNo license0Hram regs patch
frubem
28.2 × 26.6 mm5 parts2LNo license0BBC-USBSlim
Board-Folk
84.1 × 54.2 mm44 parts2LNo license4BBC-PS2
Board-Folk
91.4 × 100.5 mm36 parts2LNo license4
How designs wire the 74LS251
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LS251 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 83% · not connected 17% | — |
| I4pin 15 | Connected to: A connector 67% · not connected 17% |
|
| VCCpin 16 | Connected to: 5V 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BBC-PS2 by Board-Folk, CP297s by Danjovic, Soil Sensor Hub by ArtoLabs and Block Relay Daughter by DavidMFlynn.
The 74LS251 in open source designs
The gallery holds 7 open source boards using the 74LS251 from 6 GitHub repositories; a typical one measures about 98 × 91.1 mm and carries around 44 components.
86% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is CP297s by Danjovic.
Parts used alongside the 74LS251
Microcontrollers on boards using the 74LS251
What boards using the 74LS251 are built for
74LS251: common questions
Where can I find a 74LS251 reference design?
Each of the 7 boards on this page is a real design using the 74LS251. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS251 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the 74LS251.
Which microcontrollers do boards using the 74LS251 use?
Most are built on ESP8266 (1).
How big is a typical board using the 74LS251?
The median is 98 × 91.1 mm, and 86% are two-layer designs.
What is the most popular open source board using the 74LS251?
By GitHub stars, CP297s by Danjovic, with 4 stars.
Can I simulate one of these boards using the 74LS251 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.