10 open source boards using the 74LS540
Real designs built with the 74LS540, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
4004MainBoard
novi
95.1 × 72.1 mm109 parts2LCC-BY-4.04TD4 imem
akita11
100 × 100 mm157 parts2LMIT1AVR/Arduino
Z80-arduino
stefanberndtsson
94 × 75.6 mm28 parts2LNo license1Diode matrix rom
charlespax
76.9 × 64.5 mm31 parts2LMIT0SPI Unit
oberrow
96 × 70 mm29 parts4LMIT1UART Unit
oberrow
63.8 × 77.6 mm13 parts2LMIT1ExpansionBoard
MicroLind-Developers
170.2 × 170.2 mm43 parts4LCERN-OHL-P-2.00Timer Unit
oberrow
58 × 47 mm12 parts2LMIT182C55 GPIO Unit
oberrow
52 × 72 mm11 parts4LMIT1GIMIX intelligent 3 port Serial
roberto314
149.9 × 139.7 mm69 parts2LBSD-2-Clause1
How designs wire the 74LS540
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LS540 connects to, and the resistors, capacitors and other passives placed on it.
- The G2 pin is tied to GND on 5 of 7 designs (a signal on 2).
- The A0 pin has a pull-up to VDD on 3 of 7 designs, most often 10 kΩ.
- The A1 pin has a pull-up to VDD on 3 of 7 designs, most often 10 kΩ.
- The A2 pin has a pull-up to VDD on 3 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 2 | Connected to: A connector 29% |
|
| A1pin 3 | Connected to: A connector 57% |
|
| A2pin 4 | Connected to: A connector 43% |
|
| A3pin 5 | Connected to: A connector 43% |
|
| A4pin 6 | Connected to: A connector 43% |
|
| A5pin 7 | Connected to: A connector 43% |
|
| A6pin 8 | Connected to: A connector 43% |
|
| A7pin 9 | Connected to: A connector 43% |
|
| GNDpin 10 | Connected to: GND 100% | — |
| G2pin 19 | Connected to: GND 71% · a signal 29% | — |
| VCCpin 20 | Connected to: VCC 100% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 4004MainBoard by novi, TD4 imem by akita11, 82C55 GPIO Unit by oberrow and GIMIX intelligent 3 port Serial by roberto314.
The 74LS540 in open source designs
The gallery holds 10 open source boards using the 74LS540 from 7 GitHub repositories; a typical one measures about 94.6 × 73.9 mm and carries around 30 components.
70% are two-layer designs, the rest use four layers or more, and 90% carry an open source license.
The most starred is 4004MainBoard by novi.
Microcontrollers on boards using the 74LS540
What boards using the 74LS540 are built for
74LS540: common questions
Where can I find a 74LS540 reference design?
Each of the 10 boards on this page is a real design using the 74LS540. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS540 G2 pin connected?
The G2 pin is tied to GND on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the 74LS540.
What pull-up resistor is used on the 74LS540 A0 pin?
The A0 pin has a pull-up to VDD on 3 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the 74LS540.
What pull-up resistor is used on the 74LS540 A1 pin?
The A1 pin has a pull-up to VDD on 3 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the 74LS540.
What parts are used alongside the 74LS540?
The 74LS08, 74LS138 and 74LS245 appear in the most repositories here.
Which microcontrollers do boards using the 74LS540 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS540?
The median is 94.6 × 73.9 mm, and 70% are two-layer designs.
What is the most popular open source board using the 74LS540?
By GitHub stars, 4004MainBoard by novi, with 4 stars.
Can I simulate one of these boards using the 74LS540 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.