6 open source boards using the 74LVC1G17GW

Real designs built with the 74LVC1G17GW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74LVC1G17GW

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LVC1G17GW connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 2.2 µF).
NCpin 1Connected to: Not connected 60% · GND 40%
GNDpin 3Connected to: GND 100%
VCCpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (6), 2.2 µF (3), 1 µF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Leviathan by MotorDynamicsLab, P-1000010 Okra Cicada 2G PCBA by EnAccess, GW4302 by garrettsworkshop and GCode Buttons MCU by meteyou.

The 74LVC1G17GW in open source designs

The gallery holds 6 open source boards using the 74LVC1G17GW from 5 GitHub repositories; a typical one measures about 52.5 × 49.7 mm and carries around 52 components.

50% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.

The most starred is Leviathan by MotorDynamicsLab.

Parts used alongside the 74LVC1G17GW

Microcontrollers on boards using the 74LVC1G17GW

What boards using the 74LVC1G17GW are built for

74LVC1G17GW: common questions

Where can I find a 74LVC1G17GW reference design?

Each of the 6 boards on this page is a real design using the 74LVC1G17GW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G17GW VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the 74LVC1G17GW.

Which microcontrollers do boards using the 74LVC1G17GW use?

Most are built on STM32 (2) and FPGA (1).

How big is a typical board using the 74LVC1G17GW?

The median is 52.5 × 49.7 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74LVC1G17GW?

By GitHub stars, Leviathan by MotorDynamicsLab, with 121 stars.

Can I simulate one of these boards using the 74LVC1G17GW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part