6 open source boards using the 74LVC1G332

Real designs built with the 74LVC1G332, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74LVC1G332

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74LVC1G332 connects to, and the resistors, capacitors and other passives placed on it.

  • The Y pin has a pull-up to 5V on 3 of 5 designs, most often 10 kΩ.
  • The Y pin has a series resistor on 2 of 5 designs, most often 0 Ω.
GNDpin 2Connected to: GND 100%
Ypin 4Connected to: FM18W08-SG 40%
  • Pull-up to 5V on 60% · 10 kΩ (3)
  • Series resistor on 40% · 0 Ω (2)
VCCpin 5Connected to: 5V 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mbc3 FRAM typeA 1-1 by MouseBiteLabs, GAMEBOY-MBC5-2MB by sillyhatday, Sgb mbc5 1-4 by MouseBiteLabs and VGAVDG by flypie.

The 74LVC1G332 in open source designs

The gallery holds 6 open source boards using the 74LVC1G332 from 5 GitHub repositories; a typical one measures about 81.8 × 65.9 mm and carries around 54 components.

67% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.

The most starred is Mbc3 FRAM typeA 1-1 by MouseBiteLabs.

Parts used alongside the 74LVC1G332

Microcontrollers on boards using the 74LVC1G332

What boards using the 74LVC1G332 are built for

74LVC1G332: common questions

Where can I find a 74LVC1G332 reference design?

Each of the 6 boards on this page is a real design using the 74LVC1G332. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the 74LVC1G332 Y pin?

The Y pin has a pull-up to 5V on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the 74LVC1G332.

Which microcontrollers do boards using the 74LVC1G332 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74LVC1G332?

The median is 81.8 × 65.9 mm, and 67% are two-layer designs.

What is the most popular open source board using the 74LVC1G332?

By GitHub stars, Mbc3 FRAM typeA 1-1 by MouseBiteLabs, with 49 stars.

Can I simulate one of these boards using the 74LVC1G332 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part