6 open source boards using the MBC5
Real designs built with the MBC5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
GAMEBOY-MBC5-2MB
sillyhatday
51 × 61 mm12 parts2LCC-BY-SA-4.047AVR/Arduino
Sgb mbc5 1-4
MouseBiteLabs
110.7 × 69.8 mm88 parts4LCC-BY-SA-4.040GB Flashcarts
nm3210
51 × 30.7 mm8 parts2LNo license12Mbc5 multi typeB 2-1
MouseBiteLabs
53 × 62 mm26 parts2LCC-BY-SA-4.049Mbc5 SRAM typeA 1-2
MouseBiteLabs
53 × 62 mm23 parts2LCC-BY-SA-4.049Mbc5 FRAM typeA 1-1
MouseBiteLabs
53 × 62 mm10 parts2LCC-BY-SA-4.049
The MBC5 in open source designs
The gallery holds 6 open source boards using the MBC5 from 4 GitHub repositories; a typical one measures about 53 × 62 mm and carries around 18 components.
83% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is Mbc5 multi typeB 2-1 by MouseBiteLabs.
Parts used alongside the MBC5
Microcontrollers on boards using the MBC5
What boards using the MBC5 are built for
MBC5: common questions
Where can I find a MBC5 reference design?
Each of the 6 boards on this page is a real design using the MBC5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MBC5 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the MBC5?
The median is 53 × 62 mm, and 83% are two-layer designs.
What is the most popular open source board using the MBC5?
By GitHub stars, Mbc5 multi typeB 2-1 by MouseBiteLabs, with 49 stars.
Can I simulate one of these boards using the MBC5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.