7 open source boards using the 74LVC1GU04DRL
Real designs built with the 74LVC1GU04DRL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
486 Board
FoxCutter
233.4 × 100 mm114 parts4LBSD-3-Clause44AVR/Arduino
Tml
0x007E
72.4 × 48.3 mm97 parts2LCC-BY-NC-4.0065c02board
rkujawa
35 × 103 mm37 parts2LGPL-3.00ECE3502 PCB Design Course - Motor Driver Project
MilesMayhew
158.2 × 86 mm48 parts2LNo license1XboxUSB-C
Redherring32
87.4 × 19.5 mm16 parts4LTAPR-OHL-1.093Prechargedischarge mkviii
olin-electric-motorsports
158.4 × 109.4 mm87 parts2LMIT13Sabertoothv2
IllinoisRoboticsInSpace
50 × 50 mm33 parts2LNo license2
How designs wire the 74LVC1GU04DRL
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LVC1GU04DRL connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| GNDpin 3 | Connected to: GND 86% | — |
| VCCpin 5 | Connected to: 5V 86% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include XboxUSB-C by Redherring32, 486 Board by FoxCutter, Prechargedischarge mkviii by olin-electric-motorsports and Sabertoothv2 by IllinoisRoboticsInSpace.
The 74LVC1GU04DRL in open source designs
The gallery holds 7 open source boards using the 74LVC1GU04DRL from 7 GitHub repositories; a typical one measures about 87.4 × 86 mm and carries around 48 components.
71% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is XboxUSB-C by Redherring32.
Microcontrollers on boards using the 74LVC1GU04DRL
What boards using the 74LVC1GU04DRL are built for
74LVC1GU04DRL: common questions
Where can I find a 74LVC1GU04DRL reference design?
Each of the 7 boards on this page is a real design using the 74LVC1GU04DRL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC1GU04DRL VCC pin?
The VCC pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the 74LVC1GU04DRL.
Which microcontrollers do boards using the 74LVC1GU04DRL use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LVC1GU04DRL?
The median is 87.4 × 86 mm, and 71% are two-layer designs.
What is the most popular open source board using the 74LVC1GU04DRL?
By GitHub stars, XboxUSB-C by Redherring32, with 93 stars.
Can I simulate one of these boards using the 74LVC1GU04DRL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.