7 open source boards using the 74LVC3G17

Real designs built with the 74LVC3G17, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 74LVC3G17

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LVC3G17 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
  • Pin 2 has a series resistor on 3 of 7 designs, most often 220 Ω (then 150 Ω).
  • Pin 5 has a series resistor on 3 of 7 designs, most often 220 Ω (then 150 Ω).
  • Pin 7 has a series resistor on 3 of 7 designs, most often 470 Ω (then 150 Ω).
Pin 2Connected to: TMC4671 29%
  • Series resistor on 43% · 220 Ω (1), 150 Ω (1), 1 kΩ (1)
GNDpin 4Connected to: GND 100%
Pin 5Connected to: TMC4671 29%
  • Series resistor on 43% · 220 Ω (1), 150 Ω (1), 1 kΩ (1)
Pin 7Connected to: TMC4671 29%
  • Series resistor on 43% · 470 Ω (1), 150 Ω (1), 1 kΩ (1)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 86% · 100 nF (6)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include V5 main by zynthian, Ftdi jtag programmer by anthony-bernaert, SDBox v2 by jbilander and Russian woodpecker by openinput-fw.

The 74LVC3G17 in open source designs

The gallery holds 7 open source boards using the 74LVC3G17 from 7 GitHub repositories; a typical one measures about 47 × 60 mm and carries around 96 components.

57% use four copper layers or more, and 71% carry an open source license.

The most starred is V5 main by zynthian.

Parts used alongside the 74LVC3G17

Microcontrollers on boards using the 74LVC3G17

74LVC3G17: common questions

Where can I find a 74LVC3G17 reference design?

Each of the 7 boards on this page is a real design using the 74LVC3G17. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC3G17 VCC pin?

The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74LVC3G17.

What resistor goes on the 74LVC3G17 pin 2?

Pin 2 has a series resistor on 3 of 7 designs, most often 220 Ω (then 150 Ω). Counted from the KiCad layouts of 7 open source designs using the 74LVC3G17.

What resistor goes on the 74LVC3G17 pin 5?

Pin 5 has a series resistor on 3 of 7 designs, most often 220 Ω (then 150 Ω). Counted from the KiCad layouts of 7 open source designs using the 74LVC3G17.

Which microcontrollers do boards using the 74LVC3G17 use?

Most are built on AVR/Arduino (1), Nordic nRF (1) and STM32 (1).

How big is a typical board using the 74LVC3G17?

The median is 47 × 60 mm, and 43% are two-layer designs.

What is the most popular open source board using the 74LVC3G17?

By GitHub stars, V5 main by zynthian, with 156 stars.

Can I simulate one of these boards using the 74LVC3G17 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part