9 open source boards using the AD8531ARTZ
Real designs built with the AD8531ARTZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32STLinkForm
grumat
73.7 × 38.1 mm65 parts2LGPL-2.015
STM32MSPBMP
73.7 × 38.1 mm62 parts2LGPL-2.015
STM32StickForm
51.5 × 20 mm60 parts2LGPL-2.015
STM32STLinkV2
73.7 × 38.1 mm59 parts2LGPL-2.015
L432KC
81.3 × 55.9 mm49 parts2LGPL-2.015
STM32MSPBMP2-stick
51.5 × 20 mm48 parts2LGPL-2.015
BlackPill-BMP
72.5 × 59.7 mm41 parts2LGPL-2.015
BluePill-G431
74.9 × 59.7 mm27 parts2LGPL-2.015
STM32BluePill-BMP
70 × 60 mm23 parts2LGPL-2.015
The AD8531ARTZ in open source designs
The gallery holds 9 open source boards using the AD8531ARTZ from 1 GitHub repository; a typical one measures about 73.7 × 38.1 mm and carries around 49 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is STLinkForm by grumat.
Microcontrollers on boards using the AD8531ARTZ
What boards using the AD8531ARTZ are built for
AD8531ARTZ: common questions
Where can I find a AD8531ARTZ reference design?
Each of the 9 boards on this page is a real design using the AD8531ARTZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AD8531ARTZ use?
Most are built on STM32 (6).
How big is a typical board using the AD8531ARTZ?
The median is 73.7 × 38.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the AD8531ARTZ?
By GitHub stars, STLinkForm by grumat, with 15 stars.
Can I simulate one of these boards using the AD8531ARTZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.